100mm Borewell Submersible
The CRI Genie 100mm series makes water management a breeze in your home. These dependable submersible water pumps, available from 1 hp to a high-powered 7.5 hp, are crafted to give you a hassle-free and consistent water supply. They’re easy to use, incredibly efficient, and built tough for longevity. Perfect for everyday water needs, from filling up your swimming pool to watering the garden, the Genie pumps are all about making sure you have the water you need when you need it.
Applications
- Pressure boosting units
- Fire fighting system
- Rural water supply
- Sprinkler system
- Industrial and mining application
- Fountains
Key Features
- More durability and hygiene
- High operating efficiency
- Angular contact bearing designed for high axial thrust load
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
- Thread-type motor construction ensures rigidity & service feasibility
All you need to know about – 100mm Borewell Submersible (Genie Series)
Specifications
| Power range | 0.37 kW – 5.5 kW (0.5 HP – 7.5 HP) |
| Speed | 2850 RPM |
| Version | Single phase 220V; Three phase 380V, 50Hz, A.C. Supply |
| Maximum total head | 568 metres |
| Maximum flow rate | 7 lps (25.20 m³/h) |
| Maximum outer diameter | 98 mm |
| Thrust load | 0.37kW – 0.75kW – 650 lbs; 1.1kW – 1.5kW – 1000 lbs; 2.2kW – 7.5kW – 1500 lbs |
| Minimum cooling flow along the motor | 0.15 m/sec |
| Method of starting | 1Ph-Capacitor Start Capacitor Run (CSCR); 3Ph – Direct Online (D.O.L) |
| Maximum starts per hour | 20 times |
| Nominal outlet size | 32, 40, 50 & 65 mm |
Material of Construcation – Pump
| Part Name | Material |
| Suction housing | Cast iron |
| Impeller | Noryl / Delrin |
| Diffuser chamber | SS 304 / Cast Iron / Noryl |
| Check valve housing | Cast iron |
| Check valve | Delrin |
| Outer shell | SS 441 / SS 304 |
| Pump shaft | SS 304 / SS 410 / SS 431 |
| Counter thrust pad | SS 304 / Hylem |
| Intermediate bearing (Sleeve / Bush) | SS 304 / NBR / LTB 4 |
| Coupling | SS 304 / 410 |
| Part Name | Material |
| Shaft seal | Nitrile butyl rubber |
| Rotor Shaft | SS 410 / 431 |
| Stator Shell | SS 441 / SS 304 |
| Journal bushes | Carbon |
| Snap ring | SS 316 |
| Thrust assembly | SS 420 & Graphite Carbon |
| Diaphragm | High Nitrile butyl rubber |
| Motor base | Cast iron |
This is the additional content that will be shown or hidden.
The CRI Zuno 100mm is a highly versatile and efficient borewell submersible pump that offers a reliable solution for residential water needs. These pumps are available in a range of options from 1 hp to powerful 3 hp models, making them ideal for deep well applications and ensuring a consistent water supply. The submersible pump motor is crafted with high-grade materials to ensure long-term serviceability and comes with features like non-toxic pre-filled liquid for optimal low-voltage performance, making them one of the best submersible pumps in the market. Whether you need it for daily use or specific requirements like a sprinkler system, the Zuno series is a top choice for homeowners seeking efficient and durable water access.
Applications
- Pressure boosting units
- Fire fighting system
- Rural water supply
- Sprinkler system
- Industrial and mining application
- Fountains
Key Features
- More durability and hygiene
- High operating efficiency
- Angular contact bearing designed for high axial thrust load
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
- Thread-type motor construction ensures rigidity & service feasibility
All you need to know about – 100mm Borewell Submersible (Zuno Series)
Specifications
| Power Range | 0.37 kW to 2.2 kW (0.5 HP – 3 HP) |
| Operating Speed | 2850 RPM |
| Version | Single-phase 220V and three-phase 380V, 50Hz, A.C. Supply |
| Maximum Head | 220 meters |
| Maximum Flow Rate | 7 lps (25.2 m³/h) |
| Maximum Outer Diameter | 98 mm |
| Thrust Load | 650 lbs for 0.37kW – 0.75kW motors to 1500 lbs for 2.2kW motors |
| Minimum Cooling Flow Along the Motor | 0.15 m/sec |
| Method of Starting | Capacitor Start Capacitor Run (CSCR) for single-phase; Direct Online (D.O.L) for three-phase |
| Maximum Starts Per Hour | 20 times |
| Nominal Outlet Size | 32, 40 & 50 mm |
Applications
- Rural water supply
- Sprinkler system
- Pressure boosting units
- Fire fighting system
- Industrial and mining application
- Fountains
Key Features
- Corrosion Resistance
- Stainless steel for additional resistance.
- High operating efficiency
- Wide Voltage Operation
- Longevity and hygiene with a design for extreme bearing
- Non-toxic liquid-filled motor
- Deflection-free rotation of the pump
All you need to know about – 100mm Borewell Submersible (Steelix x4 Series)
Specifications
| Power Range | 0.37 kW – 7.5 kW (0.5 HP – 10 HP) |
| Speed | 2900 RPM |
| Version | Single phase 220V, Three phase 380 – 415V, 50Hz, A.C. Supply |
| Maximum Total Head | 487 meters |
| Maximum Flow Rate | Up to 3.05 lps (11 m³/h) |
| Minimum Cooling Flow along the Motor | 0.15 m/sec |
| Method of Starting | Single Phase – Capacitor Start Capacitor Run; Three Phase – DOL/SD |
| Maximum Starts per Hour | 20 times |
| Nominal Outlet Size | 32, 40 & 50 mm |
Material of Construction – Pump
| Part Name | Material |
| Impeller | SS 304 |
| Stage Casing | SS 304 |
| Pump Shaft | SS 304 / SS 431 |
| Bracket | SS 304 |
| Check Valve Housing | SS 304 |
| Inlet Screen | SS 304 |
| Part Name | Material |
| Upper & Lower Housing | Cast iron |
| Stator Shell | SS 304 / SS 441 |
| Rotor Shaft | SS 431 / SS 410 |
| Journal Bushes | Carbon |
| Thrust Assembly | SS 420 & Graphite Carbon |
This is the additional content that will be shown or hidden.
The CRI Genie 100mm series makes water management a breeze in your home. These dependable submersible water pumps, available from 1 hp to a high-powered 7.5 hp, are crafted to give you a hassle-free and consistent water supply. They’re easy to use, incredibly efficient, and built tough for longevity. Perfect for everyday water needs, from filling up your swimming pool to watering the garden, the Genie pumps are all about making sure you have the water you need when you need it.
Applications
- Pressure boosting units
- Fire fighting system
- Rural water supply
- Sprinkler system
- Industrial and mining application
- Fountains
Key Features
- More durability and hygiene
- High operating efficiency
- Angular contact bearing designed for high axial thrust load
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
- Thread-type motor construction ensures rigidity & service feasibility
All you need to know about – 100mm Borewell Submersible (Genie Series)
Specifications
| Power range | 0.37 kW – 5.5 kW (0.5 HP – 7.5 HP) |
| Speed | 2850 RPM |
| Version | Single phase 220V; Three phase 380V, 50Hz, A.C. Supply |
| Maximum total head | 568 metres |
| Maximum flow rate | 7 lps (25.20 m³/h) |
| Maximum outer diameter | 98 mm |
| Thrust load | 0.37kW – 0.75kW – 650 lbs; 1.1kW – 1.5kW – 1000 lbs; 2.2kW – 7.5kW – 1500 lbs |
| Minimum cooling flow along the motor | 0.15 m/sec |
| Method of starting | 1Ph-Capacitor Start Capacitor Run (CSCR); 3Ph – Direct Online (D.O.L) |
| Maximum starts per hour | 20 times |
| Nominal outlet size | 32, 40, 50 & 65 mm |
Material of Construcation – Pump
| Part Name | Material |
| Suction housing | Cast iron |
| Impeller | Noryl / Delrin |
| Diffuser chamber | SS 304 / Cast Iron / Noryl |
| Check valve housing | Cast iron |
| Check valve | Delrin |
| Outer shell | SS 441 / SS 304 |
| Pump shaft | SS 304 / SS 410 / SS 431 |
| Counter thrust pad | SS 304 / Hylem |
| Intermediate bearing (Sleeve / Bush) | SS 304 / NBR / LTB 4 |
| Coupling | SS 304 / 410 |
| Part Name | Material |
| Shaft seal | Nitrile butyl rubber |
| Rotor Shaft | SS 410 / 431 |
| Stator Shell | SS 441 / SS 304 |
| Journal bushes | Carbon |
| Snap ring | SS 316 |
| Thrust assembly | SS 420 & Graphite Carbon |
| Diaphragm | High Nitrile butyl rubber |
| Motor base | Cast iron |
This is the additional content that will be shown or hidden.
The CRI Zuno 100mm is a highly versatile and efficient borewell submersible pump that offers a reliable solution for residential water needs. These pumps are available in a range of options from 1 hp to powerful 3 hp models, making them ideal for deep well applications and ensuring a consistent water supply. The submersible pump motor is crafted with high-grade materials to ensure long-term serviceability and comes with features like non-toxic pre-filled liquid for optimal low-voltage performance, making them one of the best submersible pumps in the market. Whether you need it for daily use or specific requirements like a sprinkler system, the Zuno series is a top choice for homeowners seeking efficient and durable water access.
Applications
- Pressure boosting units
- Fire fighting system
- Rural water supply
- Sprinkler system
- Industrial and mining application
- Fountains
Key Features
- More durability and hygiene
- High operating efficiency
- Angular contact bearing designed for high axial thrust load
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
- Thread-type motor construction ensures rigidity & service feasibility
All you need to know about – 100mm Borewell Submersible (Zuno Series)
Specifications
| Power Range | 0.37 kW to 2.2 kW (0.5 HP – 3 HP) |
| Operating Speed | 2850 RPM |
| Version | Single-phase 220V and three-phase 380V, 50Hz, A.C. Supply |
| Maximum Head | 220 meters |
| Maximum Flow Rate | 7 lps (25.2 m³/h) |
| Maximum Outer Diameter | 98 mm |
| Thrust Load | 650 lbs for 0.37kW – 0.75kW motors to 1500 lbs for 2.2kW motors |
| Minimum Cooling Flow Along the Motor | 0.15 m/sec |
| Method of Starting | Capacitor Start Capacitor Run (CSCR) for single-phase; Direct Online (D.O.L) for three-phase |
| Maximum Starts Per Hour | 20 times |
| Nominal Outlet Size | 32, 40 & 50 mm |
Applications
- Rural water supply
- Sprinkler system
- Pressure boosting units
- Fire fighting system
- Industrial and mining application
- Fountains
Key Features
- Corrosion Resistance
- Stainless steel for additional resistance.
- High operating efficiency
- Wide Voltage Operation
- Longevity and hygiene with a design for extreme bearing
- Non-toxic liquid-filled motor
- Deflection-free rotation of the pump
All you need to know about – 100mm Borewell Submersible (Steelix x4 Series)
Specifications
| Power Range | 0.37 kW – 7.5 kW (0.5 HP – 10 HP) |
| Speed | 2900 RPM |
| Version | Single phase 220V, Three phase 380 – 415V, 50Hz, A.C. Supply |
| Maximum Total Head | 487 meters |
| Maximum Flow Rate | Up to 3.05 lps (11 m³/h) |
| Minimum Cooling Flow along the Motor | 0.15 m/sec |
| Method of Starting | Single Phase – Capacitor Start Capacitor Run; Three Phase – DOL/SD |
| Maximum Starts per Hour | 20 times |
| Nominal Outlet Size | 32, 40 & 50 mm |
Material of Construction – Pump
| Part Name | Material |
| Impeller | SS 304 |
| Stage Casing | SS 304 |
| Pump Shaft | SS 304 / SS 431 |
| Bracket | SS 304 |
| Check Valve Housing | SS 304 |
| Inlet Screen | SS 304 |
| Part Name | Material |
| Upper & Lower Housing | Cast iron |
| Stator Shell | SS 304 / SS 441 |
| Rotor Shaft | SS 431 / SS 410 |
| Journal Bushes | Carbon |
| Thrust Assembly | SS 420 & Graphite Carbon |
This is the additional content that will be shown or hidden.
You might also like
How can we support you?
