200mm Borewell Submersible Pumpset (BHIMA Series)
Introducing the BHIMA Series from CRI, which features 200mm Borewell Submersible Pumpsets designed for continuous operation, incorporating water-filled, rewindable motors within a stainless steel shell. These pumps are optimised for hydraulic efficiency, with SS 410 impellers and hard chrome sleeves to enhance durability. They utilise specially designed thrust bearings to handle axial loads, which are ideal for sprinkler applications, and offer models suitable for horizontal application, ensuring versatility and performance in demanding water extraction.
Applications
- Domestic
- Garden
- Civil applications
- Farms
- Agriculture
- Irrigation
- Firefighting
- Pressure boosting
Key Features
- More sprinklers
- Rigid construction.
- High efficiency.
- Designed for wide voltage fluctuations.
- Extremely tough and hard-bearing.
All you need to know about - 200mm Submersible (BHIMA Series)
Specifications
| Power Range | 7.5kW – 63.4kW (10HP – 85HP) |
| Speed | 2900 rpm |
| Version | Three phase 380-415V, 50Hz, AC Supply |
| Maximum Total Head | 352 Metre |
| Maximum Flow Rate | 53.33 lps (192 m3/h) |
| Degree of Protection | IP 58 |
| Maximum Outer Diameter | 187 & 192 mm |
| Degree of Rotation | Three Phase – Electrically Reversible |
| Thrust Load | 7.5kW – 11kW – 3500 lbs, 15kW – 18.5kW – 6000 lbs, 22kW – 55kW – 10000 lbs |
| Class of Insulation | S1 (Continuous) |
| Type of Duty | Star Delta (SD) – 7.5kW – 55kW |
| Method of Starting | Single Phase – Capacitor Start Capacitor Run (CSCR) Three-Phase – DOL / SD |
| Nominal Outlet Size | 80, 100, 125 mm |
Materials Of Construction - Pump
| Part Name | Materials |
|---|---|
| Check valve housing | Cast Iron |
| Check valve seat | SG iron |
| Diffuser chamber | Cast iron |
| Impeller | LTB – 2 & SS 410 |
| Suction inter connector | Cast Iron |
| Inlet screen | SS 202 |
| Pump shaft | SS 410 / SS 431 |
| Cable Guard | SS 202 |
| Coupling | SS 410 / SS 431 |
Materials Of Construction – Motor
| Part Name | Materials |
|---|---|
| Upper & Lower housing | Cast Iron |
| Stator Shell | Stainless Steel |
| Shaft | EN 8 with SS 410 / 431 sleeve bush at guide |
| Journal Business | LTB 4 / Nitrile Rubber |
| Thrust Assembly | SS 420 and Graphite carbon |
| Diaphragm | High Nitrile Butyl Rubber |
You might also like
How can we support you?
