Submersible Motors (Water Filled Rewindable)
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (4” Water Filled Rewindable)
Specifications
| Nominal Dia | 4″ |
| Maximum Outer Diameter | 98 mm |
| Power Range |
0.37 – 2.2 kW – Single Phase (Incorporated with Thermal Overload Protector) 0.37 – 7.5 kW – Three Phase |
| Speed | 2900 rpm |
| Version |
Single Phase: 230V, 50Hz, AC Supply Three Phase: 380–415V, 50Hz, AC Supply |
| Class of Insulation | Y |
| Degree of Protection | IP58 |
| Direction of Rotation |
CCW – When viewed from driving end – Single Phase Electrically Reversible – Three Phase |
| Type of Duty | S1 (Continuous) |
| Down Thrust Load |
0.37 – 1.5 kW – 3000 N 2.2 – 7.5 kW – 6500 N |
| Minimum Cooling Flow Along the Motor | 0.15 m/sec |
| Maximum Liquid Temperature | 35°C |
| Max. Starts per Hour | 20 Times |
| Shaft End | Splines |
| Mounting Standard | 4″ NEMA |
| Method of Starting |
Single Phase – Capacitor Start & Capacitor Run (CSCR) Three Phase – Direct On Line (DOL) |
| Cable Lead Out | Permanently connected and sealed 3/4 core EPDM flat cable |
Material of Construction
| Part Name | Material |
|---|---|
| Impeller | SS 304 / Noryl / Cast Iron |
| Bracket | Cast Iron |
| Casing | Cast Iron |
| Motor Shaft | SS 410 |
| Motor Body | SS 304 |
This is the additional content that will be shown or hidden.
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (6” Water Filled Rewindable)
Specifications
| Nominal Dia | 6″ |
| Maximum Outer Diameter |
W6A – 145 mm W6B – 144 mm |
| Power Range | 2.2 – 45 kW – Three Phase |
| Speed | 2900 rpm |
| Version | Three Phase – 380–415V & 525V, 50Hz, AC Supply |
| Class of Insulation | Y |
| Degree of Protection | IP58 / IP68 |
| Direction of Rotation | Electrically Reversible |
| Type of Duty | S1 (Continuous) |
| Down Thrust Load |
2.2 – 22 kW – 15500 N 26 – 45 kW – 27500 N |
| Minimum Cooling Flow Along the Motor | 0.15 m/sec |
| Maximum Liquid Temperature |
Standard: 35°C Optional: High Temp. – 50°C |
| Max. Starts per Hour | 15 Times |
| Shaft End | Splines |
| Mounting Standard | 6″ NEMA |
| Method of Starting |
2.2 – 45 kW – Direct On Line (DOL) 5.5 – 45 kW – Star Delta (SD) |
| Cable Lead Out | Permanently connected and sealed 3/4/6 core EPDM Flat Cable |
| Thermal Protection | Optional – PT 100 Sensor |
Introducing C.R.I.’s 4” Water-Filled Submersible Motors, the perfect blend of advanced technology and robust construction. Meticulously crafted for full submersion, these motors feature a water-based cooling system that enhances longevity, even under the most demanding conditions. Ideal for applications requiring reliable water delivery, such as sophisticated irrigation systems and complex water supply networks, each motor exemplifies our dedication to quality, sustainability, and reliability. Experience the excellence of C.R.I. motors, engineered to deliver flawless performance for years to come.
Applications
- Residence
- Agriculture
- Gardens
- Sprinkler systems
- Fountains
- Building services
Key Features
- High efficiency
- Water lubricated rewindable motor
- Thermal protection in single phase motors
- Extremely hardwearing and water lubricated bearings
- Corrosion resistant stainless steel motor body
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (4″ Water Filled)
Specifications
| Nominal Diameter | 4″ |
| Series | Water Filled Rewindable Submersible Motors |
| Power Range kW |
Single Phase: 0.37 – 2.2 kW Three Phase: 0.37 – 7.5 kW * Single phase motors are thermally protected. |
| Speed | 2900 rpm |
| Versions |
Single Phase: 230V, 50Hz Three Phase: 380V – 415V, 50Hz |
| Method of Starting |
Single Phase – Capacitor Star Capacitor Run (CSCR) Three Phase – Direct On Line (DOL) |
| Maximum Down Thrust Load |
0.37 – 1.5 kW – 3000 N 2.2 – 7.5 kW – 6500 N |
| Type of Duty | S1 (Continuous) |
| Degree of Protection | IP 58 |
| Class of Insulation | Y |
| Max. Temperature of Liquid | 30˚C |
| Minimum Cooling Flow Along the Motor | 0.5 m/sec |
| Starts per Hour |
Single Phase – 20 Times Three Phase – 12 Times |
| Available M.O.C. | Type A & N |
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (8” Water Filled Rewindable)
Specifications
| Nominal Dia | 8″ |
| Maximum Outer Diameter | 193 mm (37 – 93 kW) & 197 mm (110 kW) |
| Power Range | 37 – 110 kW – Three Phase |
| Speed | 2900 rpm |
| Version | Three Phase – 380–415V & 525V, 50Hz, AC Supply |
| Class of Insulation | Y |
| Degree of Protection | IP68 |
| Direction of Rotation | Electrically Reversible |
| Type of Duty | S1 (Continuous) |
| Down Thrust Load | 45500 N |
| Minimum Cooling Flow Along the Motor | 0.16 m/sec |
| Maximum Liquid Temperature |
Standard – 35°C Optional – High Temp – 50°C |
| Max. Starts per Hour | 10 Times |
| Shaft End | Splines |
| Mounting Standard | 8″ NEMA |
| Method of Starting |
Direct On Line (DOL) Star Delta (SD) |
| Cable Lead Out | Permanently Connected and Sealed 3/6 Core EPDM Rubber Insulated Flat Cable |
| Thermal Protection | Optional – PT 100 Sensor |
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (10” Water Filled Rewindable)
Specifications
| Nominal Dia | 10″ |
| Maximum Outer Diameter | 232 mm |
| Power Range | 110 – 185 kW – Three Phase |
| Speed | 2900 rpm |
| Version | Three Phase – 380–415V, 50Hz, AC Supply |
| Class of Insulation | Y |
| Degree of Protection | IP68 |
| Direction of Rotation | Electrically Reversible |
| Type of Duty | S1 (Continuous) |
| Down Thrust Load | 75000 N |
| Minimum Cooling Flow Along the Motor | 0.16 m/sec |
| Maximum Liquid Temperature | Standard – 35°C Optional – High Temp – 50°C |
| Max. Starts per Hour | 8 Times |
| Shaft End | Splines / Keyway |
| Method of Starting | Direct On Line (DOL) Star Delta (SD) |
| Cable Lead Out | Permanently Connected and Sealed 6 Core EPDM Insulated Flat Cable for SD 2 + 2 Core Individual Lead for DOL |
| Thermal Protection | Optional – PT 100 Sensor |
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (12” Water Filled Rewindable)
Specifications
| Nominal Diameter | 12″ |
| Series | Water Filled Rewindable Submersible Motors |
| Power Range kW | Three Phase: 150 – 300 kW |
| Speed | 2900 rpm |
| Versions | Three Phase: 380V – 415V, 525V, 50Hz |
| Method of Starting | Direct On Line (DOL), Star Delta (SD) |
| Maximum Down Thrust Load | 60000 N |
| Type of Duty | S1 (Continuous) |
| Degree of Protection | IP 68 |
| Class of Insulation | Y |
| Max. Temperature of Liquid |
Standard – 30˚C High Temperature – 50˚C |
| Minimum Cooling Flow Along the Motor | 0.5 m/sec |
| Starts per Hour | 12 Times |
| Available M.O.C. | Type A |
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (4” Water Filled Rewindable)
Specifications
| Nominal Dia | 4″ |
| Maximum Outer Diameter | 98 mm |
| Power Range |
0.37 – 2.2 kW – Single Phase (Incorporated with Thermal Overload Protector) 0.37 – 7.5 kW – Three Phase |
| Speed | 2900 rpm |
| Version |
Single Phase: 230V, 50Hz, AC Supply Three Phase: 380–415V, 50Hz, AC Supply |
| Class of Insulation | Y |
| Degree of Protection | IP58 |
| Direction of Rotation |
CCW – When viewed from driving end – Single Phase Electrically Reversible – Three Phase |
| Type of Duty | S1 (Continuous) |
| Down Thrust Load |
0.37 – 1.5 kW – 3000 N 2.2 – 7.5 kW – 6500 N |
| Minimum Cooling Flow Along the Motor | 0.15 m/sec |
| Maximum Liquid Temperature | 35°C |
| Max. Starts per Hour | 20 Times |
| Shaft End | Splines |
| Mounting Standard | 4″ NEMA |
| Method of Starting |
Single Phase – Capacitor Start & Capacitor Run (CSCR) Three Phase – Direct On Line (DOL) |
| Cable Lead Out | Permanently connected and sealed 3/4 core EPDM flat cable |
Material of Construction
| Part Name | Material |
|---|---|
| Impeller | SS 304 / Noryl / Cast Iron |
| Bracket | Cast Iron |
| Casing | Cast Iron |
| Motor Shaft | SS 410 |
| Motor Body | SS 304 |
This is the additional content that will be shown or hidden.
Introducing C.R.I.’s 4” Water-Filled Submersible Motors, the perfect blend of advanced technology and robust construction. Meticulously crafted for full submersion, these motors feature a water-based cooling system that enhances longevity, even under the most demanding conditions. Ideal for applications requiring reliable water delivery, such as sophisticated irrigation systems and complex water supply networks, each motor exemplifies our dedication to quality, sustainability, and reliability. Experience the excellence of C.R.I. motors, engineered to deliver flawless performance for years to come.
Applications
- Residence
- Agriculture
- Gardens
- Sprinkler systems
- Fountains
- Building services
Key Features
- High efficiency
- Water lubricated rewindable motor
- Thermal protection in single phase motors
- Extremely hardwearing and water lubricated bearings
- Corrosion resistant stainless steel motor body
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (4″ Water Filled)
Specifications
| Nominal Diameter | 4″ |
| Series | Water Filled Rewindable Submersible Motors |
| Power Range kW |
Single Phase: 0.37 – 2.2 kW Three Phase: 0.37 – 7.5 kW * Single phase motors are thermally protected. |
| Speed | 2900 rpm |
| Versions |
Single Phase: 230V, 50Hz Three Phase: 380V – 415V, 50Hz |
| Method of Starting |
Single Phase – Capacitor Star Capacitor Run (CSCR) Three Phase – Direct On Line (DOL) |
| Maximum Down Thrust Load |
0.37 – 1.5 kW – 3000 N 2.2 – 7.5 kW – 6500 N |
| Type of Duty | S1 (Continuous) |
| Degree of Protection | IP 58 |
| Class of Insulation | Y |
| Max. Temperature of Liquid | 30˚C |
| Minimum Cooling Flow Along the Motor | 0.5 m/sec |
| Starts per Hour |
Single Phase – 20 Times Three Phase – 12 Times |
| Available M.O.C. | Type A & N |
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (7” Water Filled Rewindable)
Specifications
| Nominal Dia | 7″ |
| Maximum Outer Diameter | 181 mm |
| Power Range | 37 – 75 kW – Three Phase |
| Speed | 2900 rpm |
| Version | Three Phase – 380–415V, 50Hz, AC Supply |
| Class of Insulation | Y |
| Degree of Protection | IP68 |
| Direction of Rotation | Electrically Reversible |
| Type of Duty | S1 (Continuous) |
| Down Trust Load | 37 – 75 kW – 45500 N |
| Minimum Cooling Flow Along the Motor | 0.16 m/sec |
| Maximum Liquid Temperature |
Standard – 35°C Optional – High Temp – 50°C |
| Max. Starts per Hour | 10 Times |
| Shaft End | Splines |
| Mounting Standard | 6″ NEMA |
| Method of Starting |
Direct On Line (DOL) Star Delta (SD) |
| Cable Lead Out | Permanently Connected and Sealed 3/6 Core EPDM Rubber Insulated Flat Cable |
| Thermal Protection | Optional – PT 100 Sensor |
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (8” Water Filled Rewindable)
Specifications
| Nominal Dia | 8″ |
| Maximum Outer Diameter | 193 mm (37 – 93 kW) & 197 mm (110 kW) |
| Power Range | 37 – 110 kW – Three Phase |
| Speed | 2900 rpm |
| Version | Three Phase – 380–415V & 525V, 50Hz, AC Supply |
| Class of Insulation | Y |
| Degree of Protection | IP68 |
| Direction of Rotation | Electrically Reversible |
| Type of Duty | S1 (Continuous) |
| Down Thrust Load | 45500 N |
| Minimum Cooling Flow Along the Motor | 0.16 m/sec |
| Maximum Liquid Temperature |
Standard – 35°C Optional – High Temp – 50°C |
| Max. Starts per Hour | 10 Times |
| Shaft End | Splines |
| Mounting Standard | 8″ NEMA |
| Method of Starting |
Direct On Line (DOL) Star Delta (SD) |
| Cable Lead Out | Permanently Connected and Sealed 3/6 Core EPDM Rubber Insulated Flat Cable |
| Thermal Protection | Optional – PT 100 Sensor |
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (10” Water Filled Rewindable)
Specifications
| Nominal Dia | 10″ |
| Maximum Outer Diameter | 232 mm |
| Power Range | 110 – 185 kW – Three Phase |
| Speed | 2900 rpm |
| Version | Three Phase – 380–415V, 50Hz, AC Supply |
| Class of Insulation | Y |
| Degree of Protection | IP68 |
| Direction of Rotation | Electrically Reversible |
| Type of Duty | S1 (Continuous) |
| Down Thrust Load | 75000 N |
| Minimum Cooling Flow Along the Motor | 0.16 m/sec |
| Maximum Liquid Temperature | Standard – 35°C Optional – High Temp – 50°C |
| Max. Starts per Hour | 8 Times |
| Shaft End | Splines / Keyway |
| Method of Starting | Direct On Line (DOL) Star Delta (SD) |
| Cable Lead Out | Permanently Connected and Sealed 6 Core EPDM Insulated Flat Cable for SD 2 + 2 Core Individual Lead for DOL |
| Thermal Protection | Optional – PT 100 Sensor |
Experience the dependability of C.R.I.’s Water-Filled Rewindable Submersible Motors, the ultimate solution for maintaining a steady and efficient water supply. Available in sizes from 4” to 12”, these motors are ideal for diverse settings requiring robust water extraction, whether it’s for your garden, farm, or industrial facility. Advanced features such as the water-filled cooling system ensure environmentally friendly operation and minimal maintenance, while the sturdy design with insulated copper windings provides durability and cost-effectiveness. These motors exemplify technological sophistication and operational reliability, meeting both NEMA and international standards.
Applications
- Water supply
- Industries
- Agriculture
- Commercial buildings
- Pressure boosting
- Livestock watering
- Fire fighting
- Sprinkler
- Construction
- Mining De-watering
Key Features
- High efficiency
- Water lubricated rewindable motor
- Corrosion resistant stainless steel motor body
- Extremely hardwearing and water lubricated bearings
- Special design for hot water
- Can be easily dismantled and repaired
All you need to know about – Submersible Motors (12” Water Filled Rewindable)
Specifications
| Nominal Diameter | 12″ |
| Series | Water Filled Rewindable Submersible Motors |
| Power Range kW | Three Phase: 150 – 300 kW |
| Speed | 2900 rpm |
| Versions | Three Phase: 380V – 415V, 525V, 50Hz |
| Method of Starting | Direct On Line (DOL), Star Delta (SD) |
| Maximum Down Thrust Load | 60000 N |
| Type of Duty | S1 (Continuous) |
| Degree of Protection | IP 68 |
| Class of Insulation | Y |
| Max. Temperature of Liquid |
Standard – 30˚C High Temperature – 50˚C |
| Minimum Cooling Flow Along the Motor | 0.5 m/sec |
| Starts per Hour | 12 Times |
| Available M.O.C. | Type A |
You might also like
How can we support you?
